12v 12.5a 150Watt ac dc power adapter for motors devices,with UL CE 2 years warranty
Specifications:
* Input: AC 100-240V 50/60Hz 1.6A Max
* Output: 12V 12.5A
* Max Wattage: 150W
* DC plug size: Outer Diameter: 5.5mm . Inner Diameter: 2.5mm ( Compatible plug 5.5mmx2.1mm )
* Cable Length about: 110cm
* Power Supply with LED indicator
* The adapters Connector: inside positive (+) . outside negative (-)
* With IC Chip: Short circuit protection, Over voltage protection
* Perfect replacement for 7A / 8A / 9A / 10A / 11A 12A as amperage isnt forced.
(If your previous Adaptor was less than 12.5A then this will be a perfect replacement as amperage is NOT Forced)
Features:
* 100% Brand New and High Quality 12V 12.5A Power adapter.
* Provide one year warranty, During the warranty period,free to replace damaged cargo with brand-new product.
* 100% true Ampere, so it won't overload within the rated ampere.
* 100% New IC Chip, so the performance of product will be more stable.
* 100% factory aging test, so the life of product will be more secure.
* 100% new electron component, so the performance of product will be more excellent.
* As with all our products these Power Adapter meet all CE and CCC approval
* For Wireless Router, ADSL Cats, HUB, Switches, CCTV, Audio/Video Devices
1. Product Overview :
The information described in detail the 200, 16.6A a long type series of non dimming
built-in active PFC function of single channel output LED driver power supply,
protection grade is IP20 indoor installation; with short circuit, over voltage, temperature
protection function.
2, Basic Electrical Characteristics :
Input voltage :
| | Minimum voltage /frequency | Rated voltage / frequency | Maximum voltage /
frequency |
| Input voltage | 100Vac | 230Va | 240Vac |
| Input frequency | 47Hz | 50Hz/60H | 63Hz |
output characteristics :
| Rated output current | Rated voltage range | Remarks |
| 16.6A | 100v-240v | Enough |
4, output short circuit protection :
Output short circuit, the power supply into the protection of the state, after the failure to
lift the power to automatically resume normal work .
5, output overload protection :
When the output load current is more than 1.5 times, the product enters the the state of
the protection, the product is not damaged, when the fault is excluded, the power
automatically resume normal work
6, output over temperature protection :
When power supply working environment temperature exceeds 85 + 5 DEG C, OTP
power protection no output, below the point of internal power supply temperature is reset
to the protection and automatic restoration of power work
7, reliability requirements :
When the rated input voltage, full load, ambient temperature is 25 degrees Celsius, the
average power supply no failure time at least 50000 hours
8, safety rules :
(1) dielectric withstand voltage (high pressure) : I/P-O/P:3.75KVAC
(2) leakage current : 0.25mAmax at 240Vac/50Hz
(3) insulation resistance : I/P-O/P:≥50M O hm s/500V D C /25℃/70% R H
(4) safety standards : EN61347-1 Meet EN61347-1
(5) cooling mode : Natural cooling
