12volt 24volt led power supply, 200Watt waterproof IP67 led transformer with 240v AC inpu 80% Efficiency
Place of Origin: Guangdong, China (Mainland)
Brand Name: Anenerge
Model Number: AE-24-200W
Output Power: 200W
Output Type: Dual
Input Voltage: 110-240VAC
Output Voltage: 24VDC
Output Frequency: 47-63HZ
Output Current: 8.3A
Size: 240*69*43MM
Warranty: 5 Years
Certification: CE ROHS TUV
Application: LED Lighting
Type: Constant Voltage
Protections: Short Circuit Overtemp Overload Overvolt
Efficiency: 88%
Waterproof: IP67 Level
Material: Aluminum Alloy
Features:
*Constant Voltage mode LED power supply
*Universal AC input/full range
*withstand 3750V surge voltage
*PF>0.98,Effciency>88% @full loda
*Available for customizing output current/voltage
*Protections :Short Circuit/Over Load/Over Voltage/OverTemperature
*Fully encapsulated with IP67 level
*2-3 times bum-in teste wiht 100% full toad for more than 24 hours
*Rubycon/NCC capacitor,5 years warranty
| Model | LPV/AE-12-200W | | |
| DC output voltage | 12V | | |
| Output voltage error | ±1% | | |
| Rated output current | 16.7A | | |
| Output current range | 0~16.7A | | |
| Wave and noise | 100mVp-p | | |
| Inlet stability | ±0.5% | | |
| Load stability | ±0.5% | | |
| DC output power | 200W | | |
| Efficiency | 80% | | |
| AC input voltage range | 170 ~ 264VAC |
| Input current | 2A/230V |
| AC impulse current | Cold-start current 13A/115V 26A/230V |
| Leakage current | <3.5mA/240VAC |
| Over load protection | 105%~150% rated output power |
| Protection:Hiccup mode |
| Protection:Shut down output voltage |
| short circuit protection | Protection:Hiccup mode |
| Setup rise hold up time | 200ms,100ms,30ms |
| Vibration | 10~500Hz,2G 10min./1cycle,Period for 60min,Each axes |
| Withstand voltage | I/P-O/P:2.5KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
| Isolation resistance | I/P-O/P:100M Ohms / 500VDC / 25 / 65% RH |
| Working temperature and humidity | -10~+60°C, 20~90%RH |
| Store temperature and humidity | -20~+85°C, 10~95%RH |
| Overall dimension | 240×69×43mm |
| Weight | 1.3Kgs |
| Safety standards | Desgin refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved |
| EMC | EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved |
| Note: | |
| 1. The parameter under the testing condition: 230VAC input, rated load, 25°C70% RH. Temperature. |
| 2. Tolerance: Including setting tolerance, circuit stability and load stability. (Note: 5). |
| 3. Wave test: Adopting “A12” double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. |
| 4. Inlet voltage stability test: the lowest voltage will be up to the highest voltage when the circuit overload. |
| 5. Load stability test: The load is from 0% to 100%. |
