
Add to Cart
12V 24V 200Wattt Constant voltage led driver IP67 outdoor led power supply with CE Rohs
Model | 12V 24V 200Wattt Constant voltage led driver IP67 outdoor led power supply with CE Rohs |
Our Main Models | Constant Voltage(Iron Shell): DC5V/12V/24V, 10W, 15W, 20W, 30W, 40W, 60W, 80W, 100W, 120W, 150W and 200W 36V 700mA, and so on |
Output Current | 4.2A |
Output Frequency | 50-60Hz |
Output Voltage | DC 12V / 24V |
Output Power | 1-200W |
Input Voltage | AC 170-250V or AC 90-130v |
Input Type | Dual |
Rate Power | 100W |
Size | 187*69*43mm |
Shell Material | Metal |
Efficiency | 0.81 |
Ripple | Less than 150mV |
Certification | CE, ROHS |
Protection | IP67 1.Short Circuit: Protection mode(revocers automatically after fault condition is removed.) So,if your power supply not work,please wait for 30 seconds,then start it again. Maybe its self-protection worked. Protection model(shut down output votlage,work again after re-started. |
Environment | Working Temperature: -30-50 Centigrades(refer to output load derating curve) Working Humidity: 20-99% RH non-condensing(waterproof) |
Safety & EMC | Safety Standards: CE mark(LVD),IP67 Input--Output,1.5KVAC Input--GND:1.5KVAC EN55015:2006; EN61547:1995+A1:2000; |
Warranty | 2 years |
Features:
Small size,High efficiency,High reliability,Long lifetime;
IP67 rating;
Working temperature -25~+50°C
Protection:Overload,Short-circuit pratection,Over-temperature;
Typical efficiency:85%
Low standby power,min to 0.5W;
Start delay design,which can reduce the starting current when multiple simulatance start;
CE,EMC,IP67 certifide,ROHS compliant;
Low output ripple moises.